Power CUTTER 150

The technology of the PC 200 for smaller nominal diameters

The cost-effective alternative

Despite its investment-friendly price, this milling robot has inherited many of the technical genes of its big brother Power Cutter 200 and can be operated with the same control unit/hose package. Sleek design with three degrees of freedom, functional design without any supply lines on the robot.


Strain relief via screw connection

  • Slim design
  • Powerful carriage drive
  • Integrated hydraulics for arm lift
  • Internal supply lines
  • Tilt measurement


  • Robot arm with lifting and lowering function
  • Circling of robot arm left and right
  • Forward and reverse travel

Degrees of freedom

  • Robot arm with lifting and lowering function
  • Circling of robot arm left and right
  • Forward and reverse travel

Robot arm

  • Stroke movement of 80 mm
  • Endless circles without stop
  • Air motor/milling head is manually adjustable
  • Sensory monitoring of pressure, humidity and temperature

Front camera

  • High-resolution CCD color camera as twin camera
  • Powerful optics with LED illumination
  • Pressurized

Mechanical features

No supply lines on the device!

  • No external air hose for the air motor on the housing
  • No external water hose for camera cleaning on the housing
  • No hydraulic lines on the housing
  • No cables for camera supply on the housing

This robot design allows endless circling without mechanical stop of the arm. No damage to supply lines for air motor and camera.

Electronic surveillance

  • Pressure sensor in the carriage
  • Temperature sensor in the carriage
  • Humidity sensor in the carriage

CAN bus communication

  • Secure data transmission between the controller and the connected components.
  • Modular structure thanks to CAN bus.
  • Easy integration of additional components into the system.


  • Display of pressure, temperature and humidity in the device.

Technical data


Operating range

DN 150 – DN 300

Total length

750 mm

Arm length

200 mm


105 mm


20-25 kg*
* Depends on configuration
Subject to technical changes and further developments.

Control system

The sensory monitoring is a true highlight that offers a number of practical advantages. Inclination sensors determine the axial and radial inclination of the carriage, sensors monitor pressure and humidity in the carriage and angle sensors monitor the position of the components in relation to each other as well as the arm circular function. The controls provide the following benefits:

  • Universal supply voltage 115 V/ 230 V
  • Compact design (width 19″, height 3HE)
  • Communication via CAN bus
  • External control panel with display
  • Control of all movements by joystick
  • Switchable video inputs and outputs
  • Parameter visualization
  • Display of lateral and longitudinal inclination
  • Storage and recall of parameters
  • Weight approx. 8 kg

Supply technology

Cable drum

  • Supply voltage 115 V/ 230 V
  • 140 m special cable; tensile force > 400 kg
  • 220 m special cable; tensile force > 400 kg
  • Automatic winding and unwinding of the cable
  • Forced guidance of the cable during winding and unwinding
  • Integrated meter display
  • Adjustable cable tension
  • Adjustable cable speed
  • Manual reeling of the cable possible
  • Weight approx. 39 kg

Hose reel

  • 100 m or 200 m twin hose for air and water supply
  • Manual rewind or automatic unwind
  • Rotating joint for air and water
  • Sturdy tubular steel frame
  • Weight approx. 56 kg

Air motor

The extraordinarily powerful ECO-Line motor is equipped with an M14 connection thread.


  • Power: 860 W
  • Speed: 18,0001/min
  • Torque: 4 Nm
  • Air consumption: 1,050 l/min


Diamand milling heads

Field of application: mineral materials such as concrete and stoneware. Can also be used for processing of cast materials to a limited extent.


Milling heads from the Epulo series

Field of application: all non-mineral materials such as liner material, roots and plastics. ATTENTION: The milling heads of the Epulo series may not be used for machining steel or for cast-iron materials!


High-performance milling heads for the Power CUTTER 200

The perfect tools for unprecedented drilling and milling performance, especially when it comes to very hard materials with impressive results.

Within just a few seconds, these extremely high quality tools can drill holes of several centimeters with subsequent milling.

The absolutely clean cutting pattern further demonstrates the product’s superiority over conventional milling heads.

Universal base

Universal base for mobile use to supply the Power CUTTER 200 E / 200 / 150.

Comprehensive solution for the provision of all required media with integrated air treatment, power and water supply including crane system. Can be quickly assembled and disassembled, including the control panel.